3MO FTX TRANSAXLE SEQUENTIAL TRANSMISSION
Torque 800 Nm / 600 lb-ft
FTX 800 Heavy Duty 6 Speed
OVERVIEW
This versatile Transaxle Sequential Transmission has a wide range of 35 gear ratios and 3 final drive ratio options to ensure there’s a right ratio for every situation. WIth its 230mm / 9″ crown wheel; its robust and built to handle grueling conditions. The Sequential Transaxle Transmission is designed to accomodate 8000 Nm / 5900 lb-ft on the differential line so around 800 Nm / 600 lb-ft of engine torque depending on the gear ratios chosen.
The 3MO FTX gearbox has 3 Dog Ring inspection ports to save maintenance time and is fitted with a TFJ self locking differentrial where the preload can be adjusted without removal from the gearbox.
This gearbox is also available in 4WD format which you can see HERE
APPLICATIONS
Circuit – Rally – Rally Cross – Hillclimb – Off Road
BENEFITS
Reliability – Wide Range of Ratios – Flexible Fitting
GEARBOX IN ACTION
SPECIFICATIONS
- 6 Speed Transaxle Sequential Gearbox with straight cut dog engaged gears
- Maximum engine torque 800 Nm / 600 lb-ft
- 89mm / 3.5″ shaft centreline
- 20mm / 0.787″ gear tooth width (1st to 3rd) & 17mm / 0.669″ (4th to 6th)
- Gear Ratio options
– 3 final drive ratios
– 35 gear ratios - 230mm / 9″ Crown Wheel
- TFJ self locking differential with 4 + 4 disc system and many ramp angles
- Planet gear support cross
- Bevel gear guided
- Cluster removable
- Preload adjustment without disassembly
- Input shaft length and spline to suit customer needs
- Range of bellhouses for most of the popular engines
- Pressure fed lubrication system requiring a customer-supplied oil pump
- 108 output flanges for Lobro
- 3 Dog Ring inspection ports
- 0-5V gear position sensor
- Lockout cable for reverse
- Weight: 64 kg / 140 lb
ACCESSORIES
Race car transmission parts & accessories
- Bell Housings and Adaptor Plates
- Gear Lever
- Shift Cut Knob for Gear Lever
- Paddle Shift Solutions
- Transmission Breather Kits
- Programmable Gear Position Display
- 52mm hydraulic clutch release bearing + feeder hoses
NOTES
- An adjustable clutch pedal stop is needed as the hydraulic release bearing does not have an output stop.
- Depending on your application an oil cooler may be recommended. A 13 row cooler measuring 210 x 98 x 50mm with AN6 inlet / outlet fittings will work well.
- Must use 75w140 fully synthetic lubricant – Motul Gear Competition is highly recommended
- Oil Capacity is 3.2 Litres / 3.4 Quarts excluding lines and cooler